Aluminum alloy die-casting release agent RD-207

1、 Performance:

This product is a mixture of high-temperature grease and silicone, with excellent temperature resistance. All raw materials are imported with original packaging, and the performance is stable. The surface of the die-casting product is very bright, and the error of the die-casting part is less than 0.04mm. It is suitable for high-precision die-casting needs.

Carbon free performance - the surface of molds and castings does not produce carbon deposits or oxide scales, and does not affect subsequent surface treatments such as electroplating and spraying.

The die-casting release agent is sprayed onto the surface of the mold, and the active ingredients form a dense thin film. This film is resistant to high pressure and erosion during the injection process, effectively preventing the bonding between the die-casting product and the mold, and serving as a release and anti sticking function. By using this die-casting release agent, the mold temperature can be kept constant between 260~290 ℃, and the mold will not crack due to cold or heat.

The die-casting release agent forms a uniform film without accumulation, and the surface of the casting is bright without color spots. Die casting release agent has good adhesion to the surface of high-temperature molds and can be operated at mold temperatures up to 350 ℃. It can be used at casting temperatures up to 600 ℃.

Die casting release agent is non-toxic, non flammable, non corrosive, non reactive, and does not produce harmful smoke during use.

The surface of the mold is basically free of residue, and cleaning and maintenance are simple. The surface of the product is smooth and easy to clean.

2、 Main purpose:

The demolding of various aluminum alloy products is particularly suitable for demolding aluminum alloy die-casting products and zinc alloy products.

3、 Technical indicators:

Appearance: Milky white liquid

Density: 0.98 (D420)

Active ingredient: 50%

Viscosity: 20 (mPa. s/25 ℃)

Flash point: ＞ 750 ℃

Diluent: Water

4、 Usage:

The mold release agent must be diluted with clean tap water, and diluted 1:500-600 times for aluminum alloy die-casting mold release. After stirring evenly, it can be used; The dilution ratio can be adjusted appropriately according to the complexity of the casting and the depth of the mold.

Spray with a spray gun or automatic system, pay attention to even spraying.

The optimal temperature for the mold is above 500 ℃. 

5、 Packaging:

High strength plastic drum packaging, with a net weight of 25KG or 200KG per drum.

6、 Storage and expiration date:

Die casting release agent should be stored at room temperature, paying attention to anti freezing and sun protection. After opening, it should be sealed and stored properly. The expiration date is 24 months, and it must be inspected and qualified before use.